In AOL 3.0 or earlier, click the setup button on the welcome screen. Click setup modem, then edit commands. Replace the existing string with one listed below. Input the strings one at a time until you get your disired result. Add ^M (shift+6, capital M) to the end of each string. In AOL 4.0 or later, click the setup button on the welcome screen. Click add or change modem. Click the devices tab. Highlight your modem then hit expert setup and click the edit commands button. Replace the existing Setup Modem String with one of the commands listed below until you get your disired result. Add ^m (shift+6, capital M) to the end of each string. Dual Mode Modem Strings For Connections. For recieve add S0=n (n=number of rings until answer) STRINGS WITH +MS=12 COMMANDS ARE V.90 STRINGS WITH +MS=56 COMMANDS ARE KFLEX THE +MS= COMMANDS ARE INTERCHANGABLE ************************************************************************************************* THESE ARE THE MOST COMMONLY USED STRINGS AT&F&C1&D2+MS=12 ****NOTE THIS STRING IS FOR V.90**** AT&F&C1&D2+MS=56 ****NOTE THIS STRING IS FOR KFLEX**** ************************************************************************************************* AT&FS95=44+MS=12,1,36000,56000 AT&F%C1W2+MS=12,1,36000,56000 AT&F&C1&D2%C0W2+MS=12,1,36000,56000 AT&F&C1&D2\A2%C1W2+MS=12,1,36000,56000 AT&F&C1&D2\A2%C1S95=1+MS=12,1,36000,56000 AT&F&C1&D2\N5\A2%C1W2+MS=12,1,36000,56000 AT&FS95=44+MS=12 AT&F%C1W2+MS=12 AT&F&C1&D2%C0W2+MS=12 AT&F&C1&D2\A2%C1W2+MS=12 AT&F&C1&D2\A2%C1S95=1+MS=12 AT&F&C1&D2\N5\A2%C1W2+MS=12 AT&FW2+MS=12 AT&FS95=44S7=200S10=200+MS=12 AT&F%C1W2S7=200S10=200+MS=12 AT&F&C1&D2%C0W2S7=200S10=200+MS=12 AT&F&C1&D2\A2%C1W2S7=200S10=200+MS=12 AT&F&C1&D2\A2%C1S95=1S7=200S10=200+MS=12 AT&F&C1&D2\N5\A2%C1W2S7=200S10=200+MS=12 AT&FW2S7=200S10=200+MS=12 MOST EFFECTIVE INIT STRING I HAVE FOUND: AT&FW2+MS=12,1,36000,56000 IF IT IS IN AOL YOU NEED TO GO TO AOL THEN CLICK SETUP THEN MODEM THEN EDIT MODEM COMAND. AT THE END OF THE INIT STRING ADD ^M IN AOL.